You can imagine how frustrating it is to have a wooden gate that sags and refuse to close properly, if you have ever experienced it. In most of the cases, the reason behind a sagging gate is loose or bent gate hinges. If your gate is sagging because the hinge screws have become loose, here is how to fix it. Remove the hinge screws first. Now seal the holes by gluing in tiny pieces of dowel. Once the holes are properly sealed, drill new holes and install longer screws. It would be best if you use only galvanized steel screws while replacing your old ones. In case gate hinges are bent, consider replacing them with a more massive type of hinge.
However, if the gate is sagging only by a little, you can correct its alignment by shimming under the gate’s bottom hinge. To do this, you have to keep the gate open and remove the screws that attach the hinges to the gate post. Now, take a thin piece of cedar and fix it into the hinge mortise and attach the screw to the gate post again by driving bigger screws through the shim.
There might be also situations when your gate sags because of overweight. If your gate is a massive one and puts higher pressure on its hinges, it can misalign itself. One easy way to fix this issue is by making use of a turnbuckle. To attach a turnbuckle to your sagging gate, first you have to drive a screw eye into the gate’s lower corner on the gate side and another screw eye into the gate’s upper corner on the hinge side. Once this has been done, run a heavy-duty turnbuckle and a wire between the screw eyes. Now, all you have to do is tighten the turnbuckle till it no more sags. It is recommended to hire a professional fence contractor to do your gate hinge repair if you are not good with tools.
Why Choose us for Gate Hinge Repair in Arlington, VA ?
Carter Fence is a family-owned local fence contractor who has almost thirty years’ experience in fencing and awning works. We are always committed to provide fast and friendly services to our clients. In addition to this, we also promise to give you accurate project estimates entirely free of cost. At Carter Fence, we always ensure to use high-quality spare parts for all our jobs. This gives you the guarantee that you do not have to deal with frequent gate hinge problems even after the repair.
So, if you are looking for a gate hinge repair in Arlington, VA region, feel free to call us or contact us online to schedule a free estimate.